These and other questions have mostly come to us from our thousands of Amazon customers.
– What is the diameter of TOUGH-GRID® paracord? –
We generally speak of the diameter running between 5/32″ and 3/16″ or 3.96mm and 4.76mm. There is no “exact” requirement by the US Military and since the cord will compress, it is difficult to pin-down an absolute diameter.
– How much stretch does TOUGH-GRID® paracord have? –
All mil-spec paracord has a “minimum stretch” of 30%. Paracord is designed for parachutes and must have some stretch built-in for the sudden loads it is expected to endure. Military Specifications [Require] that our cord stretch is “at least 30%”.
– How many inner strands are in this paracord and are they triple or double-ply?
– TOUGH-GRID® paracord has (11) inner strands, all of which are triple-ply, 100% nylon threads. There is also a marker strand that is made of (2) black and (1) tan strand which is used by the military to identify the origin of the parachute cord.
– What are the results of the tensile strength test of TOUGH-GRID® paracord? –
There is a range at which our 750lb Type 4 Mil Spec cord fails/breaks. Generally speaking… that is somewhere between 760 and 820+ pounds. Why the range? Well, even though we ONLY sell Mil-Spec cord, there are still slight variations in the yarns. In reality… no two cords are ever identical due to variations in the nylon manufacturing process. That said; our cord always exceeds the 750lb minimum break strength.
– Can this cord be used for hammock hanging? –
It sure can and many of our customers use it for hammocks without any problems whatsoever. We use it for our hammocks as well. That said; the cord has 30% stretch built-in (required by the US Military) so you may need to re-tighten a time or two as you work-out the stretch over time. Another way to account for the stretch is to use more lines to slow the stretching process.
– Can I use this paracord for mountain or wall climbing? –
Only use paracord for climbing or descending in emergencies IF you have no other choice of a better climbing rope. While our cord is excellent and considered a great “emergency supply”, it is not intended to be a climbing rope… even though many have used paracord for such in emergencies. There are thousands of uses for paracord, but one should be prudent and cautious if life & limb are on the line.
– Could I use this cord as a replacement for the shoestrings in my boots/shoes? –
Sure, Our paracord makes excellent replacement laces and it’s a great way to keep some paracord on-hand at all times (just in case.) The cord is slightly thicker than 550lb paracord and will have some trouble fitting through very small eyelets. One of the solutions to this is to melt the ends of the paracord into sharp tapered points to help thread the cord through the eyelets. You can also straighten a paper clip and melt it into the ends of the paracord to help you guide and feed the paracord through the eyelets if they are very small. (See Explanation at Bottom)
– Are all of the colors you offer considered “Military Specification”? –
All of the 750lb Mil-Spec Paracord we sell meets the requirements of the Mil-C-5040H Type IV specifications, however, not all colors are purchased and/or used by the United States Military. Our 700lb Hybrid Mil-Spec Reflective Paracord is manufactured exactly the same as our 750lb Mil-Spec Paracord, but with two reflective strands braided into the sheath. This makes our reflective paracord non-mil-spec (like all reflective paracord for obvious tactical reasons).
– How are your different lengths of paracord packaged? –
Our 50, 100, and 150 foot lengths all come loosely coiled in sealed bags while the 200 footers come spooled on a tube and 500 and 1000 footers come coiled on a spool.
– Is TOUGH-GRID® paracord UV and Abrasion resistant… Good under harsh conditions? –
Yes, the Mil Spec REQUIRES that all our TYPE 4 Parachute Cord be UV and Abrasion Resistant (Mil-C-5040H). That said, all cordage will deteriorate over time in harsh sunlight, whipping winds, rubbing on tree bark, etc. Our cord will outlast any other paracord, but may need occasional replacement if subjected to very harsh conditions. You may also need to re-tighten it a time or two while working-out the built-in stretch.
– Is this cord suitable for making paracord bracelts and other projects? –
Absolutely. Many of our customers have spoken of their bracelet, rifle sling, or other projects they’ve made with our 750lb paracord. It can be a great upgrade from 550lb paracord as there are 11 inner strands that are very useful in survival situations. Keep in mind, 750 paracord is a bit thicker than 550 cord and may be a little bulky for more ~dainty projects.
– Is TOUGH-GRID® parachute cord pre-shrunk? –
Yes, our paracord is pre-shrunk as required by the US Military to meet their standards. We have personally tried boiling sections of paracord and measuring the length before and after to see if there was any stretch or shrinkage. We couldn’t measure any difference between the cord before and after extensive boiling, which is a common method for shrinking paracord.
– Are the 1000 foot spools continuous (no splices, etc.)? –
We don’t splice our Paracord anywhere. That said; our 1000 Footers “May come in up-to two non-spliced sections.” It sometimes happens, but we avoid it the best we can. A high percentage of the time, it is a full 1000 feet continuous. That said; we never use more than two non-spliced lengths and don’t go below 300Ft. for the shortest length if two are used. The reason some spools have two sections is that they come from “master spools.” The master spools are only 3000 feet long themselves, but lets say a defect or a “temporary manufacturing splice” was found somewhere in the last 1000 feet of the master spool while winding a 1000 footer from it… rather than start over and rewind the (up to 700Ft.) on to some other spools or hanks (lots of time and money re-handling it) the manufacturing team just adds another 300Ft.+ to fill the remainder of the spool. We could guarantee 1000Ft. continuous but would incur a lot of machine downtime and expense in the process. Along with that… we find that 99%+ of our customers really don’t care if it is continuous as they just cut multiple sections out of it anyway. We try to keep the cord cost as low as we can and this is one of the ways we do it. Just so you know… the 50, 100, 200 and 500 footers are always guaranteed continuous.
– What is the shipping weight of each length of parachute cord? –
Our shipping weights (plus whatever additional packaging is used) are: 50Ft. (5.1 Oz.) – 100Ft. (9.2 Oz.) – 200Ft. (18 Oz.) – 500 Ft. (44 Oz.) – 1000Ft. (87 Oz.) and our 150Ft. “USA Tri-Pack” and “Camo Tri-Pack” weigh (15.3 Oz.).
– Will you be adding any other colors to your listing? –
We add colors based on the demand for each color. We are always looking into adding new colors as we want to have something for everyone. If there is a rise in demand for a certain color, we do our best to add that color to the listing. eMail or call us if there is a specific color you’d really like and we’ll see what we can do.
– Are some colors more pliable and flexible than others? –
Yes, some of our paracord colors actually start-out a little bit stiffer than others but become (pretty much) equally pliable with use and time. Our Red cord starts out a little stiffer than any other color but soon becomes very flexible. Our White cord, on the other hand, is very soft right off-the-bat. This leads us to believe that the dyes used in the sheathing must be responsible for the initial difference. Since the inner (11) “Triple-Strands” are never dyed, this seems to be the only logical conclusion.
– Can I use this paracord to suspend my bear bag or other gear? –
Yes, but keep in mind, mil spec paracord is required by the U.S. Military to have at least 30% stretch built-in. So, when hanging bear bags or hammocks etc., it helps to either double or triple the line OR re-tighten it after the stretch is pretty much worked-out from it. The cord is actually made for parachutes and has to be able to stretch so it doesn’t break under the sudden load of a parachute opening. Our 750 Mil Spec cord is actually used for cargo parachutes and that is why it is extra tough.
– Can this cord be used as clothesline? –
Definitely. Clothesline is generally 3/16 – 1/4 inch and our paracord is anywhere between 5/32 and 3/16 inch. Our cord is much stronger than clothesline and if your clips will clamp tight, it will certainly work. Due to the Mil Spec stretch requirements, you may need to re-tighten a time or two to keep your clothesline taut, especially over a long stretch.
– Is this cord appropriate for HAM / amateur radio operator antennas? –
Yes, this cord is very often used by amateur radio operators to hang / support their antennas. One thing to keep in mind is the 30%+ stretch. Because of this, your lines may need to be tightened over time.
– Will this cord work as a backup rope for a tree swing? –
Because our cord is built for parachutes, it has 30%+ stretch built-in to it. If it suddenly had to take the full load of a person falling from a swing, it would stretch quite a bit first… maybe even more than you’d want it to. That may cause a problem or endanger people. I’d recommend a primary rope that had little or no stretch to it. (Consider TOUGH-GRID® Ultra-Cord with an amazingly-low 3% stretch and 5,000lb Avg. breaking strength.) If you want to use paracord for your backup rope, we would suggest braiding a multi-strand rope with 3 or more lengths of paracord.
– Is there a way to combine shipping charges for multiple rolls ordered at the same time? –
By default, our products will be packed together to minimize your shipping costs where possible. Where we run into issues is when some cord is in California, but we don’t have the other color(s) or length(s) you want at the same warehouse in California, but it is sitting in i.e. Pennsylvania. That actually happens quite often because we are doing our best to guarantee same day or second day shipping for so many orders. That is the reason our cord is housed in many different warehouses across the United States. If all the cord you order comes from the same warehouse, you will more than likely get combined shipping.
– What is the “Working Load” of your 750lb Mil-Spec paracord? –
Ropes, cords, cables, and chains, have a working load limit of somewhere between 15% and 35% of their maximum (tensile strength or breaking strength) weight limit. You should not confuse the “Working Load Limit” with the “Breaking Strength” of the paracord. The “Breaking Strength” or “Tensile Strength” is “the average force at which the cord would break if in new and unused condition when a load is applied in direct line to the cord at a uniform rate of speed on a standard pull testing machine.” This is a minimum of 750lbs all the way up to 820+lbs for our 750 Mil Spec paracord. The working load limit has to do with how much load (weight or tension,) a rope, cord, cable, chain, etc. can be expected to hold over time. In the case of our 750lb Mil Spec Paracord, that is about 35% of its breaking strength, or ~260lbs. As an example, if you were to hang a 260lb object on a single length of cord, it would stretch (about 30%) but should not break. Hanging a 265lb object on a single length of cord will cause it to stretch (about 30%) but exceeds the working load limit, so it would eventually fail/break. In reality, any significant load kept on the cord for a long period of time “may” cause it to fail. It was built for parachutes with sudden and short-term loads after all.
– Is there any way to buy this cord in Canada? –
Unfortunately, we don’t sell our paracord internationally, but do hope to sell internationally someday.
– Does your 750 cord have a nylon sheath? –
Yes, the sheath is 100% nylon, as are the inner strands. We have a “Certificate of Compliance” to prove this cord meets the Mil-C-5040H Specs.
– Does 750 cord take longer to melt? –
All 750 paracord will take longer to melt than 550 paracord. This is because of the amount of material that needs to be melted. Our cord has (11) inner triple strands, while most 550 cord has (7) or (8) inner double or triple strands. We recommend using a red-hot knife instead of a flame for creating cleaner cuts/melts and for tapering ends if needed for threading into boot eyelets, etc. We have also noticed that some colors melt easier than others. That can only be related to the dyes used in manufacturing as all our paracord is 100% Nylon and nothing else.
– Why are the inner cores and outer sheath not connected? –
This is the nature of all real parachute cord. Paracord is different from other ropes and has different qualities. The inner cores/strands are not supposed to be connected and can be taken out for many, many different uses. This is called a “kernmantle” construction. In all real paracord, only the ends are melted together. The 11 inner strands will slide freely inside the sheath except when/where the ends are melted together.
– Is this paracord good for hammocks? –
When done properly, our cord is excellent for hanging hammocks. Part of the US Military’s Mil-C-5040H requirements is that the paracord has at least 30% stretch. This is crucial when they are using it for parachutes since the cord needs to endure a very sudden load without damaging the cargo. Because of that, this cord can be used for suspending hammocks but will need to be re-tightened over time. One way to slow the stretch is to double or triple the number or cord sections hanging your hammock. Also, when suspending a hammock with paracord, you’ll want to span the shortest distance you can to reach the trees (or other item) you’re tying off to. The more paracord, the more stretch distance. The less paracord, the less stretch distance. For every 10 feet of paracord, you will get ~3.33 feet of stretch. Paracord can be great for suspending hammocks but it helps to know how parachute cord works and how to use it.
– How is your paracord packaged? –
Everywhere we sell our paracord, there are images that show what the paracord will be packaged like. We ship the 50 and 100 foot lengths coiled into a hank and placed in a bag. The 150Ft. Tri-Packs are (3) 50 foot hanks put into a bag. The 200 footers are shrink-wrapped on a tube. The 500 & 1000 footers are shrink-wrapped on a spool. If you click on the small thumbnails of these images, it will display the image in a larger format so you can examine more closely and see additional images.
– What can I expect on shipping speed and accuracy? –
We use something called FBA or “Fulfillment by Amazon” to complete all of our orders. This means we ship our paracord to Amazon warehouses all over the United States and they ship our cord to customers from there. Amazon does this to try and make sure people can get 1 or 2 day shipping. If a customer orders some Royal Blue Paracord in California, but we only have Royal Blue Paracord in Florida, it is much harder for them to offer or achieve 1 or 2 day shipping. Amazon is extremely good at shipping with more than 99%+ on-time delivery. If you ever have an issue with a shipment, please let us know.
– Does this paracord fit a standard spool tool? –
Unfortunately, most spool tools do not have a big enough hole to fit 750lb Mil-Spec Paracord which is about 1/32″ thicker than 550 cord. You can easily remedy this by using a small file or emery board to file the cord holder opening to be a little wider to accommodate the thicker paracord. By the way, we really like our Spool Tool made by TricornE and sold on Amazon!
– Why is your red paracord such a deep red color? –
Our red paracord is dyed to the color that the United States Military purchases. It is a fairly “deep red” which a lot of people really like. It is impossible to show “exact” colors online. People are visiting via PC, Mac, Tablet, Phones, etc. and no two screens display colors the same way… as far as that goes, no two eyeballs see them the same way either. If you really “must have” a certain color, we recommend you buy a small section of it first and see if it meets your needs, then buy the quantity you want.
– Is this paracord pre-shrunk? –
Absolutely. We have a certificate of compliance that our cord is made to Mil-C-5040H specifications and while some colors are not purchased by the Military, all colors are pre-shrunk, even colors like Neon Green or Pink.
– Why would anybody ever rate this cord less than 5-stars? –
The truth is, most of the time we get anything under 5-stars, the review poster hasn’t had a chance to test the cord yet. We would prefer to have people leave reviews who have given our paracord a fair test instead of giving it a lower rating because they don’t know how well it works. We, however, have no control over that. Most of these folks forget to come back and review and rate it again after they have used it. Kind of a bummer, but we understand how busy people get. Most of our 4-Star reviews are from good people who just haven’t had the chance to test it yet, so they don’t want to overstate anything. We always hope they’ll come back and update things even so. Thank you very much for reading our FAQ’s. We hope you found them helpful. If you have any other questions, comments, or concerns, please don’t hesitate to give us a shout. We will be updating this FAQ periodically as we see more great questions from customers.
All the Best to You and Yours,
Bill & Son Adam Hanover…
—The cool trick to help thread your boots with our thicker paracord!—
Since our paracord has trouble fitting through very small eyelets, Bill came up with a great idea.
All you need to make this work is a length of paracord that you will use for your laces (give yourself a few extra inches), a paperclip, a pair of pliers, and an old wood-handled steak knife.
1) Straighten the paperclip as straight as you possibly can.
2) Holding the paperclip with a pair of pliers, heat the end of the paperclip with a hot flame such as a stove top or propane torch until it glows red. USE CAUTION!
3) Push the end of the hot paperclip into the end of the paracord about 1″.
4) Once the paperclip cools it will be fully fused into the end of the paracord. Next we want to taper the end of the paracord.
5) Heat the tip of the blade of your old steak knife until it is glowing hot.
6) Use the hot knife to melt and taper the top of the paracord that holds your paperclip. USE CAUTION! You’ll want the tip of the paracord to be conical to help even further to guide the paracord through the small eyelets of your boots or shoes.
7) Reheat your knife and cut/seal the end of the paracord to make a nice, clean tip to your paracord. Some people like to crimp a tube on the end of the shoe or melt the end a little bigger to have something to grip onto when tying their laces.
And that’s it! Just repeat these steps with any paracord that you plan on threading through your small eyelets. I’ll post some thumbnail pictures below which you can click on to view full-size to see some images of this project. Thanks for reading!
Understanding Mil Spec Type 3 & 4 Paracord:
1. “Mil Spec” is the abbreviated term for “Military Specifications.”
2. To classify 550lb (Type 3,) and 750lb (Type 4,) Parachute Cord (a.k.a. Paracord,) as “Mil Spec”, it must be certified to meet or exceed the standards required by the “Mil-C-5040H” guidelines published by the US Government.
3. The Mil-C-5040H standards are very specific as to the types of materials to be used, characteristics like: Tensile Strength, UV and Abrasion Resistance, Elongation, Number of Carriers (Strands,) Twisting of Strands, Inclusion of a Manufacturer Marker Strand, and how the paracord is to be constructed etc.
4. Only (2) two colors are called-out or mentioned in the Mil-C-5040H document: “Natural” (meaning White,) and “Camouflage Green,” which replaced “O.D. Green” (Olive Drab,) in 1994. The US Government (Military) routinely purchases these as well as other colors of Mil Spec Parachute Cord not mentioned in the Mil-C-5040H guidelines.
5. All Genuine Mil Spec Paracord is tested (per batch) and can only be certified if it passes all tests and meets or exceeds all other requirements of the Mil-C-5040H specifications by a US Government authorized testing lab. Records are kept that validate the successful passing of the certification tests and can be requested as a “C.O.C.” or “Certificate of Compliance.”
6. When shipping Mil Spec Parachute Cord to the US Government, it must have a very specific type of informational label affixed to the spools of cord, at lengths specified in the Mil-C-5040H document. These labeling, packaging and length requirements do not apply when shipping Mil Spec Parachute Cord to the consumer market.
*If you’d like to know more, you may download the MIL-C-5040H specifications document (PDF) using the ASSIST-QuickSearch tool (found here: https://quicksearch.dla.mil/qsSearch.aspx) as follows:
1) Search for “MIL-C-5040H” in the “Document ID:” box.
2) Click the “MIL-C-5040H NOT 2” link in the “Document ID” column.
3) Click the PDF icon next to “Revision H”.